Amped Direct-Drive Conversion Kit

Amped Direct-Drive Conversion Kit

The Amped Direct-Drive Conversion Kit is a
powerful and long-lasting option to convert your
bicycle. It's 500W direct-drive motor does not
include any internal gearing to repair or replace
and it's capable of very high top speeds. Because
of it's lack of gearing, it's larger and heavier than
a geared motor, but it will require no maintenance
and it's more affordable. See Geared Setup >

Order this kit with a pre-wired SLA battery or choose a lightweight and long-lasting LiFePo4 battery pack. We offer several battery options for this conversion kit, so please contact us if you have any questions or need any suggestions.

This Amped Bike Kit Includes:

- 1 x 500W Direct-Drive (Gearless) Hub Motor (750w/1000w output)
- 1 x Double Walled Rim w/ 13 Guage Spokes
- 1 x 36V 22 Amp Intelligent Motor Controller (capable of 36V or 48V*)
- 1 x Thumb Throttle with Battery Indicator Lights
- 1 x Handlebar Mounted On / Off Switch
- 2 x Brake Handles w/ Power Cutoff Switch
- 1 x Battery Wire Harness (for connecting 36V or 48V battery*)
- 1 x Motor Quick-Disconnect (for front wheel kits only)
- 1 x 6-Speed Freewheel (for rear wheel kits only)

We highly recommend (for front hub motors): Universal Torque Arm

You May Also Need: Rear Rack, Canvas Battery Bag

Front and rears are disc brake compatible. Rear wheels include a 6-speed freewheel. If your bike has a 7-speed freewheel, the derailer can be adjusted to use the 6-speed cluster, but you'll loose several gears (ie: 21-speed will become 18-speed).

* This kit is designed for use with a 36V battery, but it's capable of running
at 48V (warranty does not cover 48V). Although this will provide higher top speeds (between 24-27 mph), it will exceed Federal Laws and your bike may become classified as a 'motor vehicle'. At 36V this kit falls within the limitations established by the U.S. Federal Electric Bike Law, and in most states, no license or insurance is required. For front hub kits, be sure you have a fork made out of steel. This motor has the potential to tear away from an aluminum fork.

Battery Options:

SLA Battery Wiring Kit - $14.99 (need three 12V SLA batteries / charger)
SLA Wiring Kit w/ 36V Charger - $49.99 (just add three 12V SLA batteries)
36V / 12AH Sealed Lead Acid (SLA) Battery w/ Charger - $179.99
36V / 10AH Lithium Phosphate (LiFePo4) Battery w/ Charger - $469.99

	36V / 10AH LiFePo4
* SLA Specs (36V/12AH): Weight: 28 lbs | Life: 300-500 charges | Range: 8-20 miles * LiFePo4 (36V/10AH): Weight: 8 lbs | Life: 1500+ charges | Range: 12-25 miles < FIND EVEN MORE BATTERY OPTIONS FOR OUR E-BIKE CONVERSION KITS HERE >
Due to strict shipping requirements, please allow 2-3 weeks for LiFePo4 battery packs. The rest of your kit will arrive seperately within 3-10 business days.

More Amped Bike Product Pictures:	Pictures of Installed Kits >
* 90-Day Limited Warranty	Pictures of Installed Kits >