| Specifications: |
| Hub Weight: 23.5 Pounds |
| Hub Width: 75mm / 2.96" |
| Top Speed: 28-36 MPH |
| Range: See Batteries |
| Controller: 40A |
| Power: |
36V (1400W) or
48V (1900W) |
|
Crystalyte Phoenix Racer Bike Kit
The Crystalyte Phoenix Racer (or 5303)
is an
extremely powerful direct-drive motor designed
for the highest top speed. Available in a front or
rear mounted 20", 24", 26" or 700c wheel, this kit
includes everything you need except for batteries.
Choose our pre-built SLA battery pack, purchase
a wiring kit to build your own and save, or use
the 36V or 48V battery pack of your choice.
Order this kit with a pre-wired SLA battery pack (and charger) or choose a wiring kit
to use your own SLA batteries. You'll get: jumpers, fuse holder, 40A fuse, key switch, charger port, 50A Anderson and terminal connectors. Just add 12V SLA batteries!
Crystalyte Phoenix Kit Includes:
- 1 x 1000W Direct-Drive (Gearless) Hub Motor (1400w/1900w output)
- 1 x Double Walled Rim w/ 12 Guage Spokes
- 1 x 36V / 48V 40 Amp Intelligent Motor Controller
- 1 x Twist, Half-Twist or Thumb Throttle & Matching Grip
- 1 x Battery Wire Harness
- 1 x 7-Speed (5 or 8-speed upon request) Freewheel (for rear wheel kit only)
- 1 x 7" Disc (6" upon request) and Brake Caliper (for disc mount only)
- 1 x E-Bike Spoke Wrench
- 1 x Owner's Manual & Installation Instructions
Use the Crystalyte Racer (5303) when you want to go really fast! With lower torque and pulling power than the Brute or Cruiser, the Racer is designed for speed alone and is one of the fastest e-bike motors on the market. The 26" Racer has been tested at speeds up to 39 mph (in 19 seconds) at 48V, or 28 mph at 36V.
This kit exceeds limits established by Federal Electric Bike Laws. Classified
as a 'motor vehicle' in most states, this kit is only legal for offroad use unless special safety requirements are fulfilled. License and insurance may also be required. Install and ride the Crystalyte Phoenix at your own risk. For front hub kits, your bike needs to have a very strong fork made of steel. This motor is so powerful it has the potential to rip from the dropouts of an aluminum fork.
Battery Options:
SLA Battery Wiring Kit - $34.99 (need 12V SLA batteries
/ charger)
SLA Wiring Kit w/ Charger - $74.99 - $114.99 (just add 12V SLA batteries)
36V / 12AH Sealed Lead Acid (SLA) Battery w/ Charger - $204.99
48V / 12AH Sealed Lead Acid (SLA) Battery w/ Charger - $284.99
* Battery appearance may vary from the pictures below.
More Crystalyte Phoenix Kit Pictures:
PICTURES OF INSTALLED ELECTRIC BIKE KITS >
|
